(704) 360-8923 | info@intrapacinternational.com

Submit a Request


Hot
/ / / / /

Laminate Tubes

Free!$0.00

IntraPac offers a full range of laminate tube sizes ranging from ½” to 2” in diameter. Both the aluminum barrier or plastic barrier materials are available to provide the accurate feel and stability required for your product.

Our ½” diameter tubes are offered in a standard range of 2” – 3” inches tube body length that fills an estimated .125 – .250 fl. oz. We offer standard or puncture fez closures with an option for a puncture safety seal. Only aluminum barrier laminate is offered for this diameter.

1/2 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, a test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME – FLUID OUNCES
2″ 4.17 0.14
3″ 6.96 0.24
NECK SIZE ORIFICE SIZE
#12 0.155

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on specific gravity of 1.0 and are subject to customer confirmation.

Our 5/8” diameter tubes are offered in a standard range of 2” – 3” inches tube body length that fills an estimated .250 – .360 fl. oz. We offer standard or puncture fez closures with an option for a puncture safety seal. 5/8” diameter also features our special eye tip option. Only aluminum barrier laminate is offered for this diameter.

5/8 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, a test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
2″ 6.24 0.21
3″ 10.79 0.36
NECK SIZE ORIFICE SIZE
Eye Tip 0.053
#12 0.155

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 3/4” diameter tubes are offered in a standard range of 2-1/2” – 4” inches tube body length that fill an estimated .390 – .720 fl. oz. We offer pedestal, standard or puncture fez closures with an option for a puncture or a pull-tab safety seal. Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter.

3/4 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
2-1/2″ 11.45 0.39
4″ 21.26 0.72
NECK SIZE ORIFICE SIZE
#16 0.050 / 0.190 / 0.250

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 7/8” diameter tubes are offered in a standard range of 3” – 5-1/2” inches tube body length that fill an estimated .640 – 1.39 fl. oz. We offer pedestal, standard or puncture fez closures with an option for a puncture or a pull-tab safety seal. 7/8” also boasts nasal tip shoulders and caps (no safety seals available). Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter. A special resistant barrier insert for greater stability is available.

7/8 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
3″ 18.89 0.64
5-1/2″ 41.10 1.39
NECK SIZE ORIFICE SIZE
#16 0.050 / 0.190 / 0.250
Nasal Tip 0.050 / 0.115

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 1” diameter tubes are offered in a standard range of 3-1/8” – 6” inches tube body length that fill an estimated .890 – 2.02 fl. oz. We offer flip top, pedestal, standard or puncture fez closures with an option for a puncture or a pull-tab safety seal. Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter.

1 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, a test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
3-1/8″ 26.20 0.89
6″ 59.70 2.02
NECK SIZE ORIFICE SIZE
#16 0.050 / 0.190 / 0.250
13.1 0.290 / 0.320 / 0.385
M-8 0.190 / 0.250 / 0.320

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 1-7/64” diameter tubes are offered in a standard range of 3-5/8” – 7” inches tube body length that fill an estimated 1.40 – 3.10 fl. oz. We offer standard or puncture fez closures with an option for a puncture or a pull-tab safety seal. 1-7/64” also boasts nasal tip shoulders with a full diameter pedestal cap (no safety seals available). Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter.

1-7/64 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
3-5/8″ 41.60 1.40
7″ 92.60 3.10
NECK SIZE ORIFICE SIZE
#16 0.190 / 0.250
13.1 0.290 / 0.320 / 0.385
M-8 0.190 / 0.250 / 0.320
Nasal Tip 0.162

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 1-3/16” diameter tubes are offered in a standard range of 3-5/8” – 7” inches tube body length that fill an estimated 1.60 – 3.60 fl. oz. We offer flip top, pedestal, standard or puncture fez closures with an option for a puncture or a pull-tab safety seal. Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter.

1-3/16 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
3-5/8″ 47.80 1.60
7″ 106.40 3.60
NECK SIZE ORIFICE SIZE
#16 0.190 / 0.250
13.1 0.290 / 0.320 / 0.385
M-8 0.190 / 0.250 / 0.320

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 1-11/32” diameter tubes are offered in a standard range of 3-5/8” – 7-15/16” inches tube body length that fill an estimated 2.00 – 5.20 fl. oz. Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter.

1-11/64 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors, IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
3-5/8″ 60.10 2.00
7-15/16″ 154.30 5.20
NECK SIZE ORIFICE SIZE
#16 0.190
13.1 0.290 / 0.320 / 0.385
M-8 0.190 / 0.250 / 0.320

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 1-1/2” diameter tubes are offered in a standard range of 3-5/8” – 7-15/16” inches tube body length that fill an estimated 2.60 – 6.60 fl. oz. We offer flip top, pedestal, standard or puncture fez closures with an option for a puncture or a pull-tab safety seal. Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter.

1-1/2 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities. The gram weights and fluid ounces for each tube are based on a specific gravity of 1.0.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on a standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
3-5/8″ 76.00 2.60
7-15/16″ 195.10 6.60
NECK SIZE ORIFICE SIZE
#16 0.190
13.100 0.290 / 0.320 / 0.385
M-8 0.190 / 0.250 / 0.320
22-400 0.320

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Our 2” diameter tubes are offered in a standard range of 4-1/16” – 7-15/16” inches tube body length that fill an estimated 4.00 – 8.30 fl. oz. We offer flip top or pedestal closures with an option for a pull-tab safety seal. Both aluminum barrier laminate and plastic barrier laminate can be made available for this diameter. A special resistant barrier insert for greater stability is available.

2 inch Laminate Tubes

IntraPac offers a complete range of tube sizes and capacities. This drawing indicates diameter size and minimum and maximums lengths for various capacities.

Please note that these tables are intended only as a guide. Product formulation, type of fill, and filling machinery used must be considered to determine exact capacity. Because of these factors IntraPac cannot accept responsibility for inaccuracies resulting from the use of these tables. The capacities shown are based on a standard crimping or sealing allowance. Before deciding the final tube dimension, test filling of the actual product should be made. This will help ensure the tube sizing is appropriate.

LENGTH APPROX GRAMS APPROX VOLUME FLUID OUNCES
4-1/16″ 160 4.0
7″ 300 8.3
NECK SIZE ORIFICE SIZE
22-400 0.250 / 0.320

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

*fill capacity are estimates based on a specific gravity of 1.0 and are subject to customer confirmation.

Selection of the appropriate type of material for tube construction is important. There are newly developed laminate structures which include types of all plastics materials in various combinations to create compatibility and properties required for product applications. Available from IntraPac are the following choices:

Laminate Tube Materials

The all-plastics EVOH laminate tube has become a desirable option for many personal care products. A typical construction for such an application would be white PE-film outer layer, PEtie layer, EVOH barrier layer, PE-tie layer, and PE-film inner layer. Because the outer layer of the laminate is white PE-film, it can be surface printed with brilliant colors and graphics by dry offset or flexographic methods.

We offer 20 micron aluminum barrier laminate as well as 30 and 40 micron plastic barrier laminate. Specification sheets can be provide upon request.

We are capable of offering the following closures: standard fez, puncture fez, stand up pedestals or stand up flip-top caps. Each diameter offering varies. More detail can be provided upon request. IntraPac offers a variety of neck sizes as noted in the diagram on the right. Please check each product chart to find the neck sizes available for your tube.

Laminate Tubes Necks

Caps

IntraPac offers a variety of standards as well as alternative choices of stand-up or flip-top closures allowing for varied presentations of product, package, and safety. Most caps are available for IntraPac tubes, but please check before specifying non-standards.

Laminate Tubes Caps

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

IntraPac laminate and plastic tubes offer unlimited decorating and printing possibilities including full color offset printing. This guideline illustrates the printable area for each tube size. For electronic art submissions via any media the preferred platform is Mac. Acceptable software is Quark, Adobe Illustrator, Freehand or any program that can be exported to an EPS file. If this capability is unavailable, output artwork and it will be reformatted.

Mac is a registered trademark of Apple Computer, Inc. Quark is a registered trademark of Quark, Inc. Adobe Illustrator is a registered trademark of Adobe Systems, Inc. PageMaker is a registered trademark of Adobe Systems, Inc. Freehand is a registered trademark of Macromedia.

Laminate Tubes Decoration Guidelines

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

IntraPac offers standard packaging of laminate and plastic laminate tubes in various size boxes. These boxes are palletized, shrink wrapped and shipped. Options to the standard packaging are:

Laminate Tube Packaging

  • Box bags
  • Pallet bags
  • Sticky Paper
  • Corner posts
  • Banding
  • Box Lids
  • Slip Sheets
  • Corrugated Pallets
  • Plastic Corrugate

IntraPac reserves the right to change or modify the design of its products without any obligation to provide notification of change or intent to change.

IntraPac Collapsible Laminate Tubes are manufactured at our Envasa location in Costa Rica. For more details on your selected product, please click on it in the links below and you will be taken to that product’s information page on the Envasa website. Envasa is a part of IntraPac.

Description

Laminate Tubes include multiple stock neck finishes and stock closures. For added protection, we provide tamper-evident liners, pull tabs, or a puncture seal. Print technologies include flexographic, digital, silkscreen, and cold stamp.


Manufacturing

Marketing
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Compare
Wishlist 0
Open wishlist page Continue shopping